EZBUILD
Adhesives
Batteries
Duck Buggy
Electronics
EZbuilRC Planes
Hardware
Motors
Props
DSMX Receiver
$20.00
Product Specification
| Dimension and Weight: | 42.0mm(L) x 23.1mm(W), 8.7g |
| Recommended voltage range: | 3.5V to 8.5V (2S LiPo capable) |
| Technology: | DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility) |
Highlight
DSMP 6-channel receiver is DSMX/DSM2 compatible that provides exceptional performance.
Quick Reference Guide
Failsafe
Bind receiver and current channel values will be saved. Failsafe will be activated when no signal is received for 2 seconds. All channels will be positioned to failsafe default. For this reason, it is recommended that the throttle should be at 0% while all other sticks are centred during binding.
1S LiPo Application
The minimum recommended safe supply voltage is 3.5V
NOTE:
- The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.
Product Specification
| Dimension and Weight: | 42.0mm(L) x 23.1mm(W), 8.7g |
| Recommended voltage range: | 3.5V to 8.5V (2S LiPo capable) |
| Technology: | DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility) |
Highlight
DSMP 6-channel receiver is DSMX/DSM2 compatible that provides exceptional performance.
Quick Reference Guide
Failsafe
Bind receiver and current channel values will be saved. Failsafe will be activated when no signal is received for 2 seconds. All channels will be positioned to failsafe default. For this reason, it is recommended that the throttle should be at 0% while all other sticks are centred during binding.
1S LiPo Application
The minimum recommended safe supply voltage is 3.5V
NOTE:
- The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.
- Stock:In Stock
- Model:LM0080
You must be logged in to post a review.
Related products
-
EZBUILD
Fenix 150
$89.00
Read moreThe Fenix 150 is made of durable EPP foam and has an 150 Centimeter ( 60 inch ) wingspan. This Kit includes the control Horns and Pushrods, the servo Slots are pre-cut and the motor mount is in place ready to mount your motor. It needs about 20 ounces of thrust to fly, we recommend …
-
EZBUILD
Vortex Kit
Sale!Original price was: $24.00.$20.00Current price is: $20.00.
Add to cartThe Vortex is now even Lighter! New Beefy Mount! Going to be an easy excellent night-flyer.Wow !This kit is an easy to build plane. Good for flying in smaller areas. Responsive and an excellent fly! Made from white core Hobby Foam (I Like It).Specs:Wing Span 23 3/4 inchesLength 18 inchesComes with:Laser cut Water Proof Foam1 motor mount mini2 pushrods2 Linkage Stoppers2 control horns2 pushrod Guides1 Built in Battery plywood with Velcro strapSuggested Electronics-(Not Included)1- 1804-1806 Quad Motor 2000KV1- 12-20amp ESC2- 9g Budget Servos2- Linkage Stoppers1- 5×4.5 3 Blade PropRecommended Lipo:1- 450 to 650 mAh 3S battery (not included)Glue ..Hot Glue or Foamtac works well(also Foam Safe CA if you like, always use kicker with Foam Safe CA )Paint; I used spray from Lowes , Just use light coats , it did no damage to the foam. Let it dry for 5 min and another light coat if needed .Vortex foam Kit includes:
8 Laser cut foam pieces that fit perfectly and are painted and partially assembled
2 Control horns
2 Pushrods
2 Linkage stoppers
1 Plywood motor mountParts you will need to Fly this plane
18XX to 23XX, 22XX quad motor or equivalent and prop to match
ESC (20 amp) and a 500 mah 11,1v lipo
Foamtac Glue or Hot Glue
Receiver 4 or 6 channel {only 3 needed)
Transmitter(you need an Elevon Mixing Transmitter)
Reviews
There are no reviews yet.