EZBUILD
Adhesives
Batteries
Duck Buggy
Electronics
EZbuilRC Planes
Hardware
Motors
Props
EZ Lazer Kit
$29.00
Comes Partially Assembled
The EZ Lazer has Elevon Control this is available on all newer radios
8 Laser cut foam pieces that fit perfectly all you need to do is add the rudders and electronics
2 Control horns installes
2 Pushrods
2 Linkage stoppers
1 Plywood motor mount installed
Parts you will need to Fly this plane
Motor, 2)Servos, Receiver 4 or 6 channel (Only uses 3)
Transmitter(you need an Elevon Mixing Transmitter)
Out of stock
The Lazer is an amazing, stable, and Fun flyer now made of white waterproof foam for durability, another EZ plane you can build easily. I can build this ready to fly in about an Hour beginner should complete in an evening. Just 10 pieces to the whole plane..
Under the FAA 8oz minimum ,If you build it light you do not need to register this plane.
You must be logged in to post a review.
Related products
-
EZBUILD
DSMX Receiver
$20.00
Add to cartProduct Specification
Dimension and Weight: 42.0mm(L) x 23.1mm(W), 8.7g Recommended voltage range: 3.5V to 8.5V (2S LiPo capable) Technology: DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility) Highlight
DSMP 6-channel receiver is DSMX/DSM2 compatible that provides exceptional performance.
Quick Reference Guide
Failsafe
Bind receiver and current channel values will be saved. Failsafe will be activated when no signal is received for 2 seconds. All channels will be positioned to failsafe default. For this reason, it is recommended that the throttle should be at 0% while all other sticks are centred during binding.
1S LiPo Application
The minimum recommended safe supply voltage is 3.5V
NOTE:
- The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.
-
EZBUILD
Fenix 150
$89.00
Read moreThe Fenix 150 is made of durable EPP foam and has an 150 Centimeter ( 60 inch ) wingspan. This Kit includes the control Horns and Pushrods, the servo Slots are pre-cut and the motor mount is in place ready to mount your motor. It needs about 20 ounces of thrust to fly, we recommend …
Reviews
There are no reviews yet.