EZBUILD
Adhesives
Batteries
Duck Buggy
Electronics
EZbuilRC Planes
Hardware
Motors
Props
15 Amp ESC
$16.00
1 in stock
ESC-15A LBEC
Weight: 13.1g with cable
Size: 25x24x7mm
Constant Current: 15A
Max. Current: 18A (for 10 seconds)
Input: 2-3s Li-Po ; 5-10s Ni-XX
BEC: Max. 2A@5v Linear DC-DC
PWM: 8KHZ
You must be logged in to post a review.
Related products
-
EZBUILD
RGB Strip Lights per foot
$1.00
Add to cart12 V strip lights perfect for 3 cell power Price per foot so mutiple orders will be shipped as one length as in you order 6 you will get a 6ft peice. Best to use a 3s Balance connector your able to use 1 color or and combination of Red Green and lue
-
EZBUILD
DSMX Receiver
$20.00
Add to cartProduct Specification
Dimension and Weight: 42.0mm(L) x 23.1mm(W), 8.7g Recommended voltage range: 3.5V to 8.5V (2S LiPo capable) Technology: DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility) Highlight
DSMP 6-channel receiver is DSMX/DSM2 compatible that provides exceptional performance.
Quick Reference Guide
Failsafe
Bind receiver and current channel values will be saved. Failsafe will be activated when no signal is received for 2 seconds. All channels will be positioned to failsafe default. For this reason, it is recommended that the throttle should be at 0% while all other sticks are centred during binding.
1S LiPo Application
The minimum recommended safe supply voltage is 3.5V
NOTE:
- The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.
Reviews
There are no reviews yet.