Thank you to all our Repeat customers !
Add your content here

EZ Build RC wants RC to be Easy ! Dans cell: 440-666-8126 TEXTS WELCOME

EZ Build RC wants RC to be Easy ! Dans cell: 440-666-8126 TEXTS WELCOME

Category: EZbuilRC Planes

EZbuilRC Planes

Lazer Cut planes made by EZbuildRC in Ohio

  • 45″ Long Flying Surfboard

    $25.00

    EZ Build Surfboard concept by Mark Carew

    Specs:

    ● Length 45”

    ● Width 14”

    ● Approx wt 14 oz

    Parts:

    Foam:

    ● 1- surfboard

    ● 1- elevator

    ● 2- board doubles

    ● 1-center keel

    ● 1-rudder

    ● 2-outside keels

    ● 1-Character option

    Plywood:

    ● 1-two piece motor mount

    ● 1-battery mount

    Misc:

    ● 2-horn/linkage stopper, right and left

    ● 1-10” elevator rod with Z bend

    ● 1-12” rudder rod with Z bend

    ● 1-5” double sided velcro

    Power pack (optional, note: uses 500 mAh/3 cell battery))

    ● 1-Blue Wonder motor, 1700 kv

    ● 1- 10 Amp ESC

    ● 1- 8” x 4” prop

    ● 2- 9 gram servos

    Assembly (use hot glue or Foamtac):

    ● Cut hinge bevels on surfboard/elevator and keel/rudder

    ● Use packing tape to make the hinges

    ● Glue board doubles on top

    ● Glue 3 keels to the bottom

    ● Glue battery velcro in the plywood battery mount

    ● Glue the battery mount to the bottom, front of the surfboard at the cutout

    ● Glue the linkage horns to the elevator and rudder

    ● Glue the elevator and rudder servos

    ● Install the rods

    ● Mount motor/ESC/receiver

    ● Slide in your surfer character

    Throws: Elevator 1” up, ½” down, Rudder =/- 1”, CG is 14” from nose

    Add to cart
  • Vortex 40 BFV power pack

    $45.00

    Includes D2834 1170 KV motor Includes mount and prop adapter 30 amp ESC XT60 connector 3.5mm connectors 3 pair installed 2 10×5 props

    Add to cart
  • 30 Amp Brushless Motor ESC

    $20.50

    30 amp esc with a 5V 2Amp BEC for Brushless Motors -Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NIMh battery. -Compatible with: 400-450 helicopters / Aircraft or Quad-Rotor Multi RC Helicopter -Size: 45mm (L) * 24mm (W) * 11mm (H). -Works well with 2836 motor for Vortex BFV 40

    Add to cart
  • 3S Balance connector Charger side

    $2.50

    This is used for 3 cell batteries to add 12V strip lights. It uses your balance connector on your battery to power lights.

    Add to cart
  • Vortex 40″ BFV

    $39.00

     

    https://youtu.be/sCTwHmpCQkc?si=HkE3B6TXZEcZnu9p

     

    Add to cart
  • EZ Lazer Kit

    $29.00
    This plane has always been a Parkflyer and a great night-flyer.
    Wow !This kit is an easy build. Good for flying in smaller areas. Responsive and an excellent flyer!
    Made from stiff White-Core Hobby Foam (I Like It).

     


    Comes Partially Assembled

    Specs:
    Wing Span 24 inches
    Length 21 inches

    The EZ Lazer has Elevon Control this is available on all newer radios

    Comes with:
    Laser Cut Foam Parts and Laser Cut Plywood, precision fit !
    1 motor mount
    2 pushrods
    2 Linkage Stoppers
    2 control horns installed
    2 pushrod Guides
     Velcro
    Suggested Electronics-(Not Included)
    1- 2730 blue wonder
    1- 15 amp ESC
    2- 9g Budget Servos
    1- 8×4 Props withe the 1700 KV motor
    Recommended Lipo:
    1- 450 TO 850 mAh 3S battery (not included)
    Glue ..
    Hot Glue
    Lazer foam Kit includes:

    8 Laser cut foam pieces that fit perfectly all you need to do is add the rudders and electronics
    2 Control horns installes
    2 Pushrods
    2 Linkage stoppers
    1 Plywood motor mount installed

    Parts you will need to Fly this plane

    Motor, 2)Servos, Receiver 4 or 6 channel (Only uses 3)
    Transmitter(you need an Elevon Mixing Transmitter)

    Read more
  • EZBuild Cub 40 On Hold Until June

    $59.00

    EZ Build Cub 40 Instructions Cub 40 Kit 40″ wingspan made from model airplane foam. The EZ Build Cub 40 is designed to be flown by novice to expert. It is strong and lightweight and, depending on the power set up, can do many 3D maneuvers. It can be set up with flaperons or spoilerons. …

    EZBuild Cub 40 On Hold Until JuneRead More

    Read more
  • Vortex Kit

    Original price was: $24.00.Current price is: $20.00.
    The Vortex is now even Lighter! New Beefy Mount!  Going to be an easy excellent night-flyer.
    Wow !This kit is an easy to build plane. Good for flying in smaller areas. Responsive and an excellent fly! Made from white core Hobby Foam (I Like It).
    Specs:
    Wing Span 23 3/4 inches
    Length 18 inches
    Comes with:
    Laser cut Water Proof Foam
    1 motor mount mini
    2 pushrods
    2 Linkage Stoppers
    2 control horns
    2 pushrod Guides
    1 Built in Battery plywood with Velcro strap
    Suggested Electronics-(Not Included)
    1- 1804-1806 Quad Motor 2000KV
    1- 12-20amp ESC
    2- 9g Budget  Servos
    2- Linkage Stoppers
    1- 5×4.5 3 Blade Prop
    Recommended Lipo:
    1- 450 to 650 mAh 3S battery (not included)
    Glue ..
    Hot Glue or Foamtac works well
    (also Foam Safe CA if you like, always use kicker with Foam Safe CA )
    Paint; I used spray from Lowes , Just use light coats , it did no damage to the foam. Let it dry for 5 min and another light coat if needed .

     

    Vortex foam Kit includes:

    8 Laser cut foam pieces that fit perfectly and are painted and partially assembled
    2 Control horns
    2 Pushrods
    2 Linkage stoppers
    1 Plywood motor mount

    Parts you will need to Fly this plane
    18XX to 23XX, 22XX quad motor or equivalent and prop to match
    ESC (20 amp) and a 500 mah 11,1v lipo
    Foamtac Glue or Hot Glue
    Receiver 4 or 6 channel {only 3 needed)
    Transmitter(you need an Elevon Mixing Transmitter)

    Add to cart